Timbersled Mountain Horse 10.5"-12.5" X0-IFP Exit Strut Shock (2015-2018)

Our ZBROZ X0-IFP EXIT Strut Shock is a bolt on replacement for that solid strut that attaches the Snow Bike kit to your bike frame. Enhances and improves handling, steering, bump performance and suspension travel of your Snow Bike by creating the center pivot action like a dirt bike swing arm.

FEATURES INCLUDE
• High Flow Piston Design
• Custom Spring and Valving for Rider Weight and Track Length
• Billet Aluminum Construction for Light Weight Long Lasting Performance
• Threaded Pre-Load Adjustable Spring for Easy Adjustment to Spring Rate.
• Hard Anodized Shock Body and Piston for Long Life between simple Service Intervals

SAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner’s manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

California Residents: Prop 65 WARNING All EXIT SHOCKS are serviceable for years of reliable use. For service contact your local Zbroz Racing Dealer or send your shocks to us for full service. Zbroz Racing recommends that you service EXIT SHOCKS every 1,500 miles or every 24 months. All EXIT SHOCKS are custom-built, valved, and tuned to applications. Please allow a 2-4 week build time.