HD11 Can-Am Defender EXIT X1 Front Shock Kit (Pair) 2026

The Front Piggyback 2.2” X1 Series EXIT Shocks feature a
billet body construction to keep your shocks running cool when you need them
most. We add a performance high-flow piston and precisely valve and tune every
single shock off the line to meet your expectation. With direct bolt-on
capabilities, the X1 Series EXIT Shocks are easily tuned for your specific
riding style and terrain.



Each X1 Series EXIT Shock comes with compression adjustability in our
billet-designed knobs. Now you can dial in your shocks to match the terrain and
your riding style. This means you can easily adjust your EXIT Shocks tool-free
at the turn of a dial.



FEATURES INCLUDE:

• Direct Bolt-on Replacement

• Adds up to 2” of Suspension Lift and Adjustment

• Billet Construction

• 2.2” O.D. Shock Body

• 2.0“ O.D. Piggyback Reservoir

• Performance High-Flow Piston

• Precisely valved and tuned

• 5/8” Chrome Shaft

• PTFE Lined Spherical Bearings

• Progressive Closed Cellular Bump Stop

• Shot Peened & Preset Chrome Silicone Wire Springs

• Single-Rate, Simple threaded preload adjustment.

• Billet Compression Adjuster

• MADE IN THE USA

Please read Instructions thoroughly and completely before
beginning installation. Installation by a certified mechanic is recommended.
ZBROZ Racing is NOT responsible for any damage or failure resulting from
improper installation.

SAEJ2492 Warning: By installing this product,
you acknowledge that the suspension of this vehicle has been modified. As a
result, this vehicle may handle differently than that of factory-equipped
vehicles. As with any vehicle, extreme care must be used to prevent loss of
control or roll-over during sharp turns or abrupt maneuvers. Always wear seat
belts, and drive safely, recognizing that reduced speeds and specialized
driving techniques may be required. Failure to drive this vehicle safely may
result in serious injury or death. Do not drive this vehicle unless you are
familiar with its unique handling characteristics and are confident of your
ability to maintain control under all driving conditions. Some modifications
(and combinations of modifications) are not recommended and may not be
permitted in your state. Consult your owner’s manual, the instructions
accompanying this product, and state laws before undertaking these
modifications. You are responsible for the legality and safety of the vehicle
you modify using these components.

Does not fit on the Defender XT or the Defender DPS Models.
All EXIT SHOCKS are serviceable for years of reliable use. For service contact
your local Zbroz Racing Dealer or send your shocks to us for full service.
Zbroz Racing recommends that you service EXIT SHOCKS every 2,000 miles or every
24 months.



All EXIT SHOCKS are custom-built, valved, and tuned to applications. Please
allow a 2–4-week build time.



Shipping: Zbroz Racing products are fulfilled per order on a first come first
serve basis. We strive to fulfill all orders within 48 hours. Should a
backorder condition result you will be notified, and we will fulfill your order
as quickly as possible. If placing an order for a Zbroz Racing Exit Shock
product. Please know they are custom-built to order and depending upon demand
can take 4 weeks or longer to supply. Zbroz Racing products are built to last
and exceed your expectations with quality, performance, and durability in mind.
Should you have any questions or concerns please contact us at
customerservice@zbrozracing.com. Thanks again for your order and we look
forward to serving your off-road needs.