Polaris Mountain 36" X2 Exit Ski Shocks (2016-2024)
ZBROZ Polaris 36” Mountain X2 Series EXIT Ski Shocks are the highest-performance Piggyback reservoir shocks that are built to offer you complete control over your riding experience. Our X2 shocks are factory-tuned and come with compression and rebound adjustability, equipped with tuned dual-rate springs, dynamically valved/tuned specifically for you and your preferred riding terrain. our EXIT shocks are designed to give you peak performance when you need it most. So whether you're carving through fresh powder or navigating a steep line, you can count on the ZBROZ Polaris X2 Series Mountain Exit shocks to keep you in control and on top of your game.
Sled Fitment
- All Polaris AXYS Mountain Sleds - (2016-2024)
- All Polaris MATRYX Mountain Sleds - (2016-2024)
ZBROZ Polaris 36” Mountain X2 Series EXIT Ski Shocks are the highest-performance Piggyback reservoir shocks that are built to offer you complete control over your riding experience. Our X2 shocks are factory-tuned and come with compression and rebound adjustability, equipped with tuned dual-rate springs, dynamically valved/tuned specifically for you and your preferred riding terrain. our EXIT shocks are designed to give you peak performance when you need it most. So whether you're carving through fresh powder or navigating a steep line, you can count on the ZBROZ Polaris X2 Series Mountain Exit shocks to keep you in control and on top of your game.
Sled Fitment
- All Polaris AXYS Mountain Sleds - (2016-2024)
- All Polaris MATRYX Mountain Sleds - (2016-2024)
ZBROZ Mountain X2 Series Exit Ski Shocks are our highest-performance piggyback reservoir shocks and are built for complete adjustability to help conquer your terrain. Our X2 Series comes with compression and rebound adjustability, is equipped with tuned dual-rate springs, and adjustable pre-load, and is dynamically valved/tuned specifically for you and your preferred riding terrain.
ZBROZ EXIT X2 Series Ski Shocks were designed for serious riders who want the performance and reliability of coil-over-gas shocks and compression adjustability. Built to endure the toughest terrain and climates with hard anodized wear resistance on all surfaces, Billet 7075 high flow valving pistons, Billet 6061 valving assembly, and flow friction wear bands. Now you can dial in your ride at the click of a button.
FEATURES INCLUDE:
· Compression Adjustable
· Rebound Adjustable
· 1.5" Shock Body I.D.
· 1.5" Reservoir Body I.D.
· Hard Anodized for Extreme Wear Resistance on all surfaces
· Billet 7075 High Flow Valving Piston
· Billet 6061 Valving Assembly
· Flow Friction Wear Band
· 5/8" Micro Polished Chrome Shaft
· Delrin Crossover Spring Divider
· High Performance Closed Cellular Foam Bump Stop
· Advanced Seal Head Technology
· Black High Tensile Wire Springs
· Billet 6061 Eyelets
· MADE IN THE USA
SAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner’s manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
Have a certified mechanic do it for you!
All EXIT SHOCKS are serviceable for years of reliable use. For service contact your local Zbroz Racing Dealer or send your shocks to us for full service.
Zbroz Racing recommends that you service EXIT SHOCKS every 1,500 miles or every 24 months.
All EXIT SHOCKS are custom-built, valved, and tuned to applications. Please allow a 2-4 week build time.
Shipping: Zbroz Racing products are fulfilled per order on a first come first serve basis. We strive to fulfil all orders within 48 hours. Should a backorder condition result you will be notified and we will fulfil your order as quickly as possible. If placing an order for a Zbroz Racing Exit Shock product. Please know they are custom built to order and depending upon demand can take 4 weeks or longer to supply. Zbroz Racing products are built to last and exceed your expectations with quality, performance and durability in mind. Should you have any questions or concerns please contact us at [email protected]. Thanks again for your order and we look forward serving your off-road needs.