Translate
Polaris Ranger Crew XP 1000 2.2" X1 Series Rear Exit Shocks (2014-2017)
- California Residents: Prop 65 WARNING
Cancer, Birth Defects and Reproductive Harm www.P65Warnings.ca.govDoes not fit on the Defender XT or the Defender X MR Models. All EXIT SHOCKS are serviceable for years of reliable use. For service contact your local Zbroz Racing Dealer or send your shocks to us for full service. Zbroz Racing recommends that you service EXIT SHOCKS every 1,500 miles or every 24 months.
All EXIT SHOCKS are custom-built, valved, and tuned to applications. Please allow a 2-4 week build time.
Shipping: Zbroz Racing products are fulfilled per order on a first come first serve basis. We strive to fulfil all orders within 48 hours. Should a backorder condition result you will be notified and we will fulfil your order as quickly as possible. If placing an order for a Zbroz Racing Exit Shock product. Please know they are custom built to order and depending upon demand can take 4 weeks or longer to supply. Zbroz Racing products are built to last and exceed your expectations with quality, performance and durability in mind. Should you have any questions or concerns please contact us at [email protected]. Thanks again for your order and we look forward serving your off-road needs.
The 2.2” X1 Series Rear EXIT Shocks features a billet body construction to keep your shocks running cool when you need it most. We added a performance high flow piston and precisely valve and tune every single shock off the line to meet your expectation. With direct bolt-on capabilities the X1 Series EXIT Shocks are easily tuned for your specific riding style and terrain. Each X1 Series EXIT Shock comes with compression adjustability in our billet designed knobs. Now you can dial in your shocks to match the terrain and your riding style. This means you can easily adjust your EXIT Shocks tool-free at the turn of a dial.
X1 EXIT Shocks come with a dual rate spring setup including our adjustable billet crossover rings. This allows you to set your crossover point to your liking and allows for a true dual rate setup. FEATURES INCLUDE: • Direct Bolt-on Replacement • Adds up-to 2” of True Suspension Lift • Billet Constructions • 2.2” O.D. Shock body • 2.2“O.D. Piggy back reservoir • Performance High-Flow Piston • Precisely valved and tuned • 5/8” Chrome Shaft • PTFE Lined Spherical Bearings • Progressive Closed Cellular Bump Stop • Shot Peened & Preset Chrome Silicone Wire Springs • Dual Rate Spring Rate Tuning • Adjustable Billet Crossover Rings • Billet Compression Adjuster • MADE IN THE USA
SAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner’s manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
Have a certified mechanic do it for you!
Cancer, Birth Defects and Reproductive Harm www.P65Warnings.ca.govDoes not fit on the Defender XT or the Defender X MR Models. All EXIT SHOCKS are serviceable for years of reliable use. For service contact your local Zbroz Racing Dealer or send your shocks to us for full service. Zbroz Racing recommends that you service EXIT SHOCKS every 1,500 miles or every 24 months.
All EXIT SHOCKS are custom-built, valved, and tuned to applications. Please allow a 2-4 week build time.
Shipping: Zbroz Racing products are fulfilled per order on a first come first serve basis. We strive to fulfil all orders within 48 hours. Should a backorder condition result you will be notified and we will fulfil your order as quickly as possible. If placing an order for a Zbroz Racing Exit Shock product. Please know they are custom built to order and depending upon demand can take 4 weeks or longer to supply. Zbroz Racing products are built to last and exceed your expectations with quality, performance and durability in mind. Should you have any questions or concerns please contact us at [email protected]. Thanks again for your order and we look forward serving your off-road needs.
